Hot sales beautiful wood grain cement boards price

Hot sales beautiful wood grain cement boards price

Model No.︰水泥板

Brand Name︰HUAXIN

Country of Origin︰China

Unit Price︰US $ 3 / pc

Minimum Order︰1000 pc

Inquire Now

Product Description

Wood grain fiber cement boards


Product Description

wooden grain siding panel adopts the high quality quartz sand,

silicate,natural fiber, and a variety of selected mineral.with high

temperature and high pressure. 


The product do not have any radioactivity and harmful elements.

Belongs to new, green and environmental material.


The surface with the typical natural cedar wood grain,appearance

is natural and beautiful. also can prevent the attack of white ant

and sawteeth animals.


The wooden grain siding panel has the feature of durability,

flexibility and creativity, more stable and durable than wood products.


Because of the lower cost and excellent properties,it is accepted

by the foreign and domestic customers,also the best choice of

all kinds of construction.


When choose the coating material, we recommend environmental

water-based paint. For example:water-based pureacrylic coating


Recommend application:

Exterior wall of Villa, apartment,office building, work shop,school

and so on Old building renovation, interior decoration



1. Light weight, structural earthquake-resistant

2. Heat insulation

3. Fire-proof for 4 hours, class-A1 incombustibility

4. High strength, anti-bending strength more than 12MPA

5. Well decoration effect,comfortable living function

6. Green, environment material

7. Fast and simple construction, high efficiency, lower cost



Thickness: 6-12mm



Water content:≤30%

Swelling rate:≤0.25%

Anti-bending strength:≥12MPA

Water tightness:

the reverse side allows showing water mark but not dropping after 24 hours

Freezing resistance:It does not show break and layer after 25 times freeze

thawing Impact resistance:without continuous crack after shock




Fiber cement cladding is a very heavy product and requires two people

to carry the uncut sheets. Thin fiber cement cladding is fragile before

installation and must be handled carefully; it is prone to chipping and

breakage if improperly handled.


Once the product is cut it may again require two people to install – one

to hold the sheet flush against studwork and the other to nail the product

in place.Cutting fiber cement cladding sheeting usually requires a

mechanised saw or metal hand shears and sheets can be cut to size


in three ways:


Thinner sheets can be scored with a heavy duty cutting blade and snapped

Thicker and denser sheets require cutting by a mechanical saw using a

diamond blade (Masonry blade)


1/8 spacing required between end-joints (cladding seams) later to be

filled with caulking made for fiber cement siding


Metal 6"x6" step flashing required behind overlapping seams to prevent

sheathing damage from water hot dipped Galvanized roofing nails to

hang fiber cement siding


Some caution must be exercised to properly ventilate areas where

fiber cement siding (FCS) is being cut; long-term exposure to the silica

dust generated during the installation process can cause silicosis.


Fiber cement cladding can be painted before or after installation.

(For areas of exposure, weatherproof paint must be used.)

Once the product is fixed the joints are usually covered with timber battens

and the entire wall surface is painted.



The external cladding products require very little maintenance

once installed and painted. The thicker/denser fiber cement products

have excellent impact resistance but the thinner less dense products

need to be protected from impact. Compared to wooden siding,

fiber cement is not susceptible to termites or rot.[2]


Fiber cement siding using base board materials that have been

classified, by accredited laboratories, as Category A according to

BS EN 12467: 2004 Fiber-cement flat sheets - Product specification

and test methods are sidings which are intended for applications

where they may be subject to heat, high moisture and severe frost.


Fire resistance

Fiber cement cladding is a non combustible material which is widely

used in high bush fire prone area While the best possible Reaction to

Fire Classifications are A1 (construction applications) and A1Fl

(flooring applications) respectively, both of which mean "non-combustible"

according to European standardEN 13501-1: 2007, as classified

by a notified laboratory in Europe, some fiber cement boards

only come with Fire Classification of A2(limited combustibility)

or even lower classifications, if they are tested at all.



As mentioned previously, long-term exposure to silica dust generated

by cutting fiber cement siding during installation can lead to silicosis

and other lung diseases among workers.[3] Researchers at the National

Institute for Occupational Safety and Health (NIOSH) confirmed these findings,

showing that many of the silica dust particles are in the respirable fraction,

able to penetrate the deepest parts of the lung.[4] Laboratory tests performed

by cutting fiber cement siding within an isolated chamber showed that by

connecting a regular shop vacuum to a circular saw, exposures to silica

dust produced by the cutting can be reduced by 80-90%.



Competitors to fiber cement cladding include products made from vinyl,

polyvinyl chloride, wood composite products (such as hardboardand Masonite)

and aluminum siding


Payment Terms︰ T/T or L/C

Product Image